MiniFinish
Printable Data Sheet
Printed Tue, 13 May 2008 11:53:53 +0000 from url:
from Radoll.com.
Remove protruding fibers of rough edges from the separation process on your SIMM/DIMM or other high volume boards.
- Improve Your Yields
- No More Belt Sanding
- High Throughput
- 0.5 sec Typical Cycle
- Clean & Quiet
Radoll can custom design the MiniFinish to meet your specific needs. Get definable, repeatable results on small boards or in situations where existing alternatives aren't fast or accurate enough.
| MiniFinish Specifications | |
| Electrical Power: | None required |
| Compressed Air: | Up to 3 CFM shop's air @ 100 PSI |
| Noise Level: | Less than 70 dba. |
| Cutters: | 5,000 to 7,000 feet between sharpening. |
| Dust Collector : | Shop's Vac to collect gold-plated shavings |
| 175 lbs. (350 lbs. crated) | |
| Dimensions: | 33" x 52" x 48" |
| MiniFinish Edge Finishers | ||
| 050P-002 | Round Edge Polish |  |
| 050P-003 | Flat Edge Polish | |
| 050P-004 | 150o With Flat | |
| 050P-005 | 150o With Vee | |
| 050P-006 | 120o With Vee | |
 |
|
|
© Copyright 1999 - 2007 |
|