EdgeMate
Printable Data Sheet
Printed Tue, 13 May 2008 11:58:00 +0000 from url:
from Radoll.com.
- Fastest, most economical edge polishing of small lots of printed circuit boards panels.
- EdgeMate removes protruding glass fibers and fractured epoxy particles.
- Definable, repeatable benefits in the following areas: drilling, electroless, exposure, resist, screening, and general housekeeping.
- No more sharp edges means no more cut hands and fingers, improving safety (and morale!) in all departments.
|
 |
| EdgeMate
Specifications |
| Electrical Power |
120v
- 8 amp: 240v - 4 amp; 240 - 3 phase (extra charge); 240v - 50 hertz (extra
charge) |
| Capacity |
Minimum
board size of 8 inches square, no maximum board size |
| Speed: |
60
feet per minute |
| Noise Level: |
Less
than 70 dba. |
| Cutters: |
7,000
to 10,000 feet between sharpening. Universal with all of our edge finishing
machines. Lifetime guarantee. |
| Panel Thickness: |
.031"
to .125", optional package will process panels to .250" |
| Shipping Weight: |
170
lbs. (295 lbs. crated) |
| Dimensions: |
14"
x 22" x 20" |
| EdgeMate,
EdgeMate II, and EdgeMaster Cutters |
| 075-C120 |
120o
Included Angle |
 |
| 075-C150 |
150o
Included Angle |
| 075-C180 |
180o
Flat |
| 075-365 |
150o
Light chip .1 to .18 thick panels |
| Round
Edge Finishing Cutters |
| 075-504 |
.040
to 0.72 thick panels |
 |
| 075-505 |
.070
to 0.105 thick panels |
| |
 |
|
© Copyright 1999 - 2007
Radoll Designs
309 Baybrook Street
P O Box 125
Thomasville, GA 31799-0125 |
|